Tiles Experts provides bathroom tile installation for homes and businesses across Ottawa.
Floor-to-ceiling bathroom tiling planned around water exposure, from the shower pan to the vanity backsplash.
Get your free quote
Tell us about your project and we will reply with a written quote.
No obligation. We reply within one business day.
Why homeowners choose Tiles Experts for a bathroom
Clear communication
We walk through moisture zones, layout, and material choices before any tile is cut.
Written quotes
You get a clear, itemized quote for the bathroom scope before work starts.
Tidy job sites
Dust containment and daily cleanup, since a bathroom is usually the only one in the house.
Moisture-zone planning
Planning around moisture zones
A bathroom isn’t tiled as one uniform surface. The area inside a shower or around a tub is a wet zone and gets waterproof membrane over cementitious backer board before any tile is set. The floor outside that zone and the walls around a vanity are a splash zone, where the priority shifts to a durable, easy-to-clean surface rather than full waterproofing. We map these zones out before ordering material so the right substrate and membrane go in the right places, not a one-size-fits-all approach across the whole room.
Detail work
Cove base at the floor-to-wall junction
Where a tiled floor meets a tiled or painted wall, a square butt joint is a weak point for water to work its way behind the tile over time. Cove base tile, a piece with a rounded profile, closes that junction into one continuous, sealed line instead of a 90-degree seam. It’s a small detail that matters most in a room that sees standing water and mopping regularly.
Waterproof detailing
Niches, shelves, and tub surrounds
A recessed niche or built-in shelf inside a shower is popular for storage, but it means cutting an opening into a waterproofed wall. We frame and waterproof the niche as its own unit, corners, back, and sill all sealed, before it gets tiled, so it doesn’t become the one spot in the shower that leaks. The same logic applies to a tub surround: the wall above a bathtub gets treated as a wet zone, with backer board and membrane behind the tile, not just tile applied over the original wall surface.
Grout and material choices for a bathroom
Porcelain for wet areas
Porcelain tile is the common choice for bathroom floors and walls because of its low water absorption.
Epoxy or sealed grout
We typically use epoxy or well-sealed cementitious grout in wet areas since it resists staining and moisture better than standard sanded grout left unsealed.
Movement joints
Movement joints are placed where tile meets a tub, a different material, or a large run of wall, so the tile has somewhere to flex as the room's humidity and temperature shift with Ottawa's seasons.
How Much Does Bathroom Tile Installation Cost in Ottawa?
These are general Ottawa-area planning ranges, the exact price for your bathroom is confirmed in a free written quote after we've seen the space.
Bathroom floor
$15 – $30 per sq ft installed
Tile and labour for the floor only
Subfloor prep included where needed
Standard ceramic or porcelain floor tile
We measure the floor, shower, and tub surround, check the subfloor and existing waterproofing, and put together a written quote before anything is scheduled.
2
Material and layout selection
You choose tile, grout colour, and layout details like pattern direction and niche placement before install day.
3
Demo, prep, and waterproofing
Old tile comes out, the substrate is leveled or reinforced as needed, and wet areas get a full waterproofing membrane before any tile is set.
4
Tile, grout, and final walkthrough
Tile is set to the confirmed layout, grouted and sealed once cured, and we walk the finished bathroom with you before calling the job done.
Tiles Experts provides professional bathroom tile installation throughout Ottawa, Ontario. Homeowners bring us this work for a full renovation, a builder's rough-in that needs finishing, or an older bathroom where the original tile has failed at the tub or shower edge. A bathroom is one of the few rooms in a home where tile has to perform two jobs at once: look right and hold up against constant water, steam, and temperature swings, so the planning behind it matters as much as the setting.
Frequently Asked Questions
Do I need a permit to re-tile my bathroom in Ottawa?
A cosmetic, like-for-like re-tile of an existing bathroom floor or wall typically does not require a City of Ottawa building permit, as long as no plumbing, electrical, or walls are being relocated. If your project moves a drain, adds a new outlet, or changes the room's footprint, a permit is required. We'll flag it during the quote if your scope crosses that line.
How long does a full bathroom tile job take?
It depends on the size of the room and whether tile is going on the floor only or on the floor and walls. We give you a specific timeline in your written quote once we've seen the space and the scope.
What is cove base tile and do I need it?
Cove base is a rounded tile piece used at the junction where a tiled floor meets a tiled or painted wall. It closes that seam cleanly and is easier to keep sealed than a square butt joint, which is why it's common in bathrooms with a fully tiled floor.
Can you tile a niche or built-in shelf into my shower wall?
Yes. A recessed niche or shelf needs its own waterproofing detail before tile goes in, since it interrupts the wall's membrane. We build that into the wall prep so the niche is fully sealed, not just tiled over.
Do you tile the tub surround as part of a bathroom job?
Yes, tub surrounds are a common part of a bathroom scope. The area above a tub gets the same moisture-zone treatment as a shower wall, since splashing and steam affect it the same way.
Ready to plan your bathroom tile project?
Get a free written quote for bathroom tile installation anywhere in Ottawa.
